Parts List - Philips TeleMon B M2636B Service Manual

Number Description
0950-3769 Transformer between the wall outlet and the TeleMon
monitor.
0950-3919 A PC board mounting the electronics for the inverter.
1420-0864 3 V Lithium battery pressed into a holder mounted on the
main board. It powers the internal RT clock.
2090-0392 A 19.6 cm. color DSTN Liquid Crystal Display (LCD) with
integral backlight, used as the front display screen.
8121-0109 Runs between the Battery Compartment and the Main
Board. Integral connectors on each end.
M1204-61025 Circular speaker with integral input cable.
M1275-01026 Wire clip holding speaker to mount.
M2626-40001 Pre-formed plastic case for mounting the other parts of the
Rear Housing Assembly.
M2636-01007 Formed metal exhaust conduit to which the cooling fan with
integral cable have been bonded.
M2636-01008 The bracket holding the External Power Supply to its
mount.
M2636-11302 Contains the operating system, application software and PC
Connectivity Tool.
M2636-20010 Fastens battery cable connector to the Battery Compartment. Alignment Pin for battery
M2636-40002 Pre-formed plastic part.
M2636-40003 Pre-formed plastic part, one-half of the Transmitter Dock.
M2636-40004 The other half of the Transmitter Dock.
M2636-40005 Pre-formed plastic part, fastened to rear of Rear Housing. It
hold the external cables and cuff attaching to the monitor.
M2636-40006 Plastic foot attached to bottom of monitor.
M2636-40007 Pre-formed plastic part, which screws to a wall or pole
mount. It then slides into the NBP Cuff Holder and is held
by a snap latch.
This chapter includes an orderable parts list for the M2636B TeleMon Monitor.

Parts List

Part
External Power Supply
Inverter Board
Coin Cell Battery
Display
Battery-to-Main Cable
Speaker and Cable
Speaker Clip
Rear Housing
Cooling Manifold Assembly
External Power Supply Bracket
Software CD ROM Kit
connector
Battery Door
Transmitter Bay
Transmitter Latch
NBP Cuff Holder
Monitor Foot (4)
Dovetail
Parts List
7
7-1