65BDL4052E/75BDL4052E/86BDL4052E
Parts and Functions
3.
3.1.
Control Panel
[
]button
1
Press this button to turn the display on or put it in
standby mode.
[MUTE] button
2
Press this button to mute or unmute the sound.
[INPUT] button
3
Select an input source.
[ ] button
4
Increase the adjustment while OSD menu is On, or
increase the audio output level while OSD menu is Off.
[ ] button
5
Decrease the adjustment while OSD menu is On, or
decrease the audio output level while OSD menu is Off.
[ ] button
6
Move the selected item one level up while the OSD menu
is On.
[ ] button
7
Move the selected item one level down while the OSD
menu is On.
[MENU] button
8
Return to the previous menu while the OSD menu is On.
This button can also be used to activate the OSD menu
when the OSD menu is Off.
Light Sensor
9
Receive command signals of the light sensor function.
11
11
10
1
2
3
4
5
6
7
8
9
Remote control sensor and power status indicator
10
•
Receive command signals from the remote control.
•
Indicate the operating status of the display:
-
Light green when the display is turned On
-
Light red when the display is in the standby mode
When {SCHEDULE} is enabled, the light blinks green
-
and red
If the light blinks red, it indicates that a failure has
-
been detected
Lights off when the main power of the display is
-
turned off
* Use an IR sensor cable for better remote control
performance. (Please refer to the instructions on 28)
USB 2.0 PORT
11
Connect your USB storage device.
16