Installation Of Chassis Assembly - Philips TeleMon B M2636B Service Manual

Repair
Step 4.
Step 5.
Step 6.
Step 7.
Step 8.
Installation of
Note—
Chassis
assembled. Make sure the films are in position on the top of the Rear Housing and on the
Assembly
bottom of the Chassis.
5-36 Troubleshooting, Service and Repair
NBP Collar Connector
Cable Connectors
Figure 5-8 Chassis Assembly Cables
Unhook the NBP tubing from behind the Speaker Clip. Twist the NBP Tubing
Collar Connector to separate the tubing.
Half the tubing remains attached to the Rear Housing Assembly and half to the
Note—
NBP Board.
Gently pull on the Fan-to-Main Cable connector at the Main Board to release the
cable. It remains attached to the fan.
Squeeze the spring tab on the Speaker-to-Main Cable Connector at the Main Board
to release the cable. It remains attached to the Speaker.
Squeeze the spring tab on the Transmitter Power Cable at the Main Board to release
the cable. It remains attached to the Transmitter Bay Assembly.
Gently pull on the Battery-to-Main Cable connector from the Main Board. The
cable remains connected to the Battery Compartment.
The order of disassembly at this point depends of which units attached to the
Note—
Chassis Assembly, or to the Rear Housing Assembly, you wish to replace.
The Chassis Assembly and the Rear Housing Assembly must be completely