Mounting on the Wall (General)
Wall mounting requires the most preparation and is the most stable, but least mobile,
configuration.
Caution
These mounting instructions are neither applicable in California nor sanctioned by the
California OSHPD for installation in the State of California, U.S.A., in conformance to
that state's requirements for seismic protection.
The following instructions describe surface wall mount base installation to a wall.
Before instruments have been installed, the hospital or other facility, its consultants, or its
contractors shall be responsible for meeting the following conditions:
•
•
•
That the wall is adequate to safely mount monitoring instruments, including the
selection of fasteners and their proper installation.
That the installation has been completed in accordance with accepted standards of good
workmanship.
Anchorage or support in a metal stud or wood stud wall must be verified by a registered
professional engineer before installing the mounting system.
Mounting on the Wall (General)
Installation
4-5