Nbp Calibration; Accessories - Philips TeleMon B M2636B Service Manual

NBP
NBP calibration should be performed once a year or every 10,000 measurements, whichever
Calibration
comes first. The calibration procedure is done in the Service Mode of TeleMon. See "NBP
Diagnostics, Calibration" on page 5-17 for instructions.

Accessories

The performance specifications and tolerance of TeleMon are established using our supplied
accessories and supplies. Non-supplied accessories and supplies may corrupt the performance
of the equipment. We assume no liability for poor performance or injury caused by non-
supplied accessories and supplies.
Warning Warning
Non-supplied accessories and supplies may corrupt the performance of the equipment.
Use only EC-12 compliant electrodes with this device. Use of electrodes that are non-
compliant may provide erroneous results.
The following accessories are available for use with the TeleMon Monitor.
Description
Power Supply
Rechargeable NiMH Battery Pack
Battery Reconditioner, Universal
Note—
to order the appropriate localized power cord.
ECG Transmitter Trunk Cable
ECG/%SpO
This part does not include a power cord; be sure
• 5-lead AAMI
• 5-lead IEC
• 3-lead AAMI
• 3-lead IEC
Cable Clip
2
Maintenance
Order Number
M4792A
M4790A
M4791A
M4793A
M4794A
M4795A
M4796A
M1509A
Maintenance and Cleaning 8-3