The Front
Panel
Assembly
16mm T-10
Removal of
Step 1.
Front Panel
Step 2.
Step 3.
6mm T-10
Figure 5-5 Unfastening the Front Panel Assembly
Place the monitor face-down on a clean, soft surface.
Remove the two 6mm T-10 screws in the handle and the two 16mm T-10 screws
near the base. You may have to invert the monitor to drop out the screws.
Placing the monitor on its back, open the front panel from the top and slide it toward
the top of the unit, uncovering the Keyboard-to-Main Cable.
Troubleshooting, Service and Repair
Repair
6mm T-10
Rear View
16mm T-10
5-33