Philips TeleMon B M2636B Service Manual page 81

Repair
Caution
The adhesive on the splash guard is very strong. Therefore, be very careful when
installing it. Do not reposition the splash guard. If you make a mistake when installing
the splash guard, remove it and install a new one.
Step 3. Remove the other adhesive protectors and press the guard into the corners.
There should be no gaps between the rear housing and the splash guard.
Remove adhesive
protector from center
portion first.
Remove adhesive
protector from sides
and press into corners.
Troubleshooting, Service and Repair 5-49