EN
11.2.2.3. Recording measuring data
Home
Settings Sensor-settings A1
Caution:
Prior to recording the selected measuring data, configure the data logger and then start it (see chapter 11.2.3 Logger
settings (data logger)).
11.2.2.4. Alarm settings
Settings Sensor-settings A1
Home
Settings
Home
Sensor
METPOINT
BDL compact
®
Record button
Alarm button
settings A1
Alarm
button
Press the
Record
measurements to be recorded and stored on the
activated data logger.
In the alarm settings, you have the option to enter
Alarm 1
and
Alarm 2
each channel.
The alarm settings can also be configured in the
Alarm overview
menu (accessible from Home).
Alarm 1 and Alarm 2 buttons + Relay buttons
In the example,
Alarm 1
is set to
Relay
2.
Installation and operating manual
buttons to select the
including the
Hysteresis
is set to
Relay 1
and
for
Alarm 2
49