Relay Settings; Sd Card - Beko METPOINT BDL compact Installation And Operating Manual

Installation and operating manual

11.2.3.5. Relay settings

Home  Settings Device

11.2.3.6. SD card

Home  Settings Device
Home  Settings Device
70
settings Relay settings
settings SD card  Reset Logger database
settings SD card  Erase SD card
If the Relay buttons are activated, you have the
option to permit relay reset upon an alarm.
The relevant settings must be made in the password-
protected Device settings
In the event of an alarm (e.g. alarm 1 (yellow),
channel A1), a message is displayed.
If you have permitted relay reset in the
settings, you can reset the relay by pressing the
Relay 1 button.
Press the OK button to close the message box.
To lock the currently stored data for use by the BDL
compact, press the Reset logger database button. The
data remains stored on the SD card and is thus available
for external use.
To delete all data from the SD card, press the Erase SD
card button.
EN
menu.
Relay
METPOINT BDL compact
®