Beko METPOINT BDL compact Installation And Operating Manual page 82

Installation and operating manual
Important:
After all values and operators have been entered, the system is able to perform calculations with 3 values and 2
operands as follows:
Example:
V1a = (1st operand 1st operation 2nd operand) 2nd operation 3rd operand
V1a = (A1c – A2a) * 4.6
82
To enter the new unit, press the
Enter the unit and accept with OK.
To correct an entry, press the
<-
The button deletes the last character
The Clr button deletes the entire value
EN
Edit button.
<-
or Clr button.
METPOINT BDL compact
®