Labelling Measurements And Defining Resolution (Decimals) - Beko METPOINT BDL compact Installation And Operating Manual
Hide thumbs
Also See for METPOINT BDL compact:
Table of Contents
Advertisement
Installation and operating manual
Settings
Home
Sensor
For other sensor configuration options, see chapters 11.2.2.5 to 11.2.2.9.
See also chapter 11.2.2.7 Labelling and configuring text fields
Note:
After confirming with OK, the field labels change to black. The values and settings are applied.
Caution:
Reference temperature and reference pressure (factory settings 20°C, 1000 hPa):
All volume flow (m³/h) and consumption (m³) values shown on the display refer to 20 °C and 1000 hPa (according to
ISO 1217). Alternatively, enter 0°C and 1013 hPa (=standard cubic metre according to DIN 1343) as the reference values. Do
not enter the operating pressure or the operating temperature as the reference values!
11.2.2.2. Labelling measurements and defining resolution (decimals)
Note:
To configure the Resolution
Tool button:
Settings Sensor-settings A1
Home
See also chapter 11.2.2.7 Labelling and configuring text fields
48
settings
A1
(decimal places), the
Short name
Tool button
Confirm the changes with OK. The sensor
configuration is now completed.
and the
Value
name, click the
For the
Value
to be recorded, enter a
max. 10 characters. This name is then used in the
Charts
and
Chart/current values
Otherwise, the default designation (e.g. A1a) is
displayed.
A1 indicates the channel; a is the first value in the
channel,
b
would be the second, and
To adjust the
Resolution
the arrow buttons (0 to 5 decimals places).
Tool
button!
Name
with
menus.
c
the third.
of the decimal places, touch
METPOINT
BDL compact
®
EN
Advertisement
Table of Contents
Need help?
Do you have a question about the METPOINT BDL compact and is the answer not in the manual?
Questions and answers