Resolution Of Decimal Places - Labelling And Recording Data Values - Beko METPOINT BDL compact Installation And Operating Manual

EN
11.2.7.5. Resolution of decimal places – labelling and recording data values
Home  Settings Sensor-settings
Home  Settings Sensor-settings
Caution:
Prior to recording the selected measuring data, configure the data logger and then start it (see chapter 11.4 Logger
settings (data logger)).
See also chapters 11.2.2.2 Labelling measurements and 11.2.2.3 Recording measuring data.
METPOINT BDL compact
®
Virtual channels  V1 Tool button
Virtual channels  V1 Record button
Installation and operating manual
Press the Tool button to view the
decimal places, the Short name
Press the Record button to record and store the
selected data on the activated data logger.
For the Value to be recorded, enter a
max. 10 characters. This name is then used in the
Charts and Chart/current values
Otherwise, the default designation (e.g. V1a) is
displayed.
V1 indicates the channel; a is the first value in the
channel, b would be the second, and
To adjust the Resolution of the decimal places, touch
the arrow buttons (0 to 5 decimals places).
Press the Record buttons to select the
measurements to be recorded and stored on the
activated data logger.
Resolution for
and the Value name.
Name with
menus.
c the third.
83