EN
11.2.3.4. Modbus (Slave)
The
RS485 Modbus
bus/interface allows customers to connect their own systems (BMS, PLC, SCADA) to the
METPOINT
BDL compact.
®
Settings
Home
Device
METPOINT
BDL compact
®
settings
Modbus settings
Installation and operating manual
Enter the transmission parameters for
baud rate, stop bit
and parity. To activate Modbus,
check the "Enable Modbus RTU(RS485)" box.
To reset the values to the default settings, press the
Restore defaults
button.
Default values:
Baud rate:
Stop bit:
Parity:
If the METPOINT
BDL compact is connected to
®
the bus terminal, press the
termination. You also have the option to press the
Bias
button to use a BIAS.
To change the data format (word order), press the
TCP
or
RTU
button.
Default for both modes: C-D-A-B
Changes must always be confirmed with apply!
Modbus ID,
19200
1
even
Term
button to activate
69