Virtual Channel Settings; Selecting Sensor Type - Beko METPOINT BDL compact Installation And Operating Manual

Installation and operating manual

11.2.7.2. Virtual channel settings

Home  Settings Sensor-settings

11.2.7.3. Selecting sensor type

Home  Settings Sensor-settings
 Settings Sensor-settings
Home
78
Virtual channels
Virtual channels  V1
 V1
Virtual channels Type
After the virtual channels
available channels are shown in the sensor settings
menu.
Note:
By default, the channels are not preconfigured.
If no sensor has been configured yet, No sensor
displayed in the type field.
Touch the type field (reading No
list of available sensor types (see next step).
If no sensor has been configured yet, No sensor
displayed in the top field.
Pressing the Generic to select the virtual channel.
Press the No sensor button to reset the channel.
Press the OK button to confirm the selection.
EN
have been activated, the 4
is
sensor) to call up a
is
METPOINT BDL compact
®