Denoting The Measuring Data And Determining The Resolution Of The Decimal Places; Recording Measuring Data - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Operation METPOINT® BDL portable

12.3.2.2 Denoting the measuring data and determining the resolution of the decimal places

Note:
The resolution of the decimal places,
Tool button:
Main menu  Settings  Sensor settings  C1  Tool button
See Chapter 7.3.2.1.2.7 Textfelder beschriften und einstellen

12.3.2.2.1.1 Recording measuring data

Main menu  Settings  Sensor settings  C1  Recording button
Caution:
Prior to recording the selected measuring data, the data logger must be activated subsequent to the
completion of the settings
30
short name and
For the
10 characters can be entered in order to
simplify its identification at a later moment in
the
Graphics/current
Otherwise, the designation would be C1a,
for example.
C1
measured value in the channel, while
would be the second, and
The
ly adjustable by pressing right and left (0 to
5 decimal places).
With the
data are selected which will be stored at an
activated data logger.
(see Chapter 7.3.2.1.3.2 Logger-Einstellung (Datenlogger))
value name can be found below the
value to be recorded, a
menu items
values.
is the channel name and
resolution of the decimal places is easi-
recording buttons, the measuring
.
tool button!
name with
Graphics and
a is the first
b
c the third.
®
METPOINT BDL portable