Beko METPOINT BDL compact Installation And Operating Manual page 100

Installation and operating manual
 
Home Settings Logger settings
Home  Settings  Logger settings
Important:
If a new logger (recording) file is to be created, check the Enforce new logger file box. Otherwise, the last created logger
(recording) is used.
100

Start time button
 Start button/Stop button
After the Start time and/or
press the Start button to set the data logger to
active.
The data logger will start recording at the set time!
The data logger can also be started and stopped
without time settings. To do this, simply press the
Start and Stop button.
The field in the bottom left corner indicates the
number of values that are recorded and the remaining
recording time.
Notice:
The settings cannot be changed while the data logger
is recording.
EN
Stop time has been set,
METPOINT BDL compact
®