Beko METPOINT BDL compact Installation And Operating Manual page 81

EN
11.2.7.4.3. Defining operations
Home  Settings Sensor-settings
The procedure described here applies to all operators (1st operation and 2nd operation)
11.2.7.4.4. Defining unit
Home  Settings Sensor-settings
METPOINT BDL compact
®
Virtual channels  V1 right arrow (2. page)  1st operation
Virtual channels  V1  right arrow (2. page)  Unit for result
Installation and operating manual
Touch the 1st operation. The available mathematical
operations are displayed.
Press the respective button to select and apply an
operation.
To reset a selected operation, press the
button.
Touch the Unit text field to call up a list of the
available units.
Select the unit by pressing the respective unit
button. Press the OK button to apply the selected
unit.
To change between the individual list pages, press
the Page button.
If the required unit is not available, create it yourself.
To do this, press one of the pre-defined User_x
buttons.
not used
81