Terminal Assignment Connector "A1 - B2" (Analog And Digital Channels); Terminal Assignment Connector "D" (Galv. Isolated Pulse Input / Pulse Forwarding); Basic Version (Pulse Forwarding Support); Galv. Isolated Pulse Option - Beko METPOINT BDL compact Installation And Operating Manual

EN
9.2. Terminal assignment connector "A1 – B2" (analog and digital channels)
1 2
Depending on the selected option, the following combinations are supported:
Channel Combination
A1
A2
B1
B2
D = digital channel A = analog channel

9.3. Terminal assignment connector "D" (galv. isolated pulse input / pulse forwarding)

9.3.1. Basic version (pulse forwarding support)

9.3.2. Galv. isolated pulse option

In systems with 2 digital boards (2x2 digital channels), only 1 pulse input can be connected to a pulse output.
A1 or B1 for pulse 1 or A2 or B2 for pulse 2
METPOINT BDL compact
®
Both boards are equipped with internal bridges
Analog Board
3 4 6 7 8
5
1
D
D
1 2
1 2
Digital Board
9 1 2 3
2 3 4
D D A
D D A
D A
D A
3 4 5 6 7
3 4 5 6 7
Installation and operating manual
4 5 6 7 8
5 6
A A
A A
A D
A D
19