Calibrating Touch Screen - Beko METPOINT BDL compact Installation And Operating Manual

Hide thumbs Also See for METPOINT BDL compact:

Table of Contents

11.2.3.8. Calibrating touch screen

Home

 Settings

Device

METPOINT

BDL compact

settings

Calibration touchscreen

Installation and operating manual

If required, the BDL can be re-booted by pressing the

Restart

button.

If required, the touch screen calibration can be

changed.

Press the

Calibrate

button. A calibration cross

appears, first in the top left corner, then in the

bottom right corner and finally at the centre of the

display. Touch these crosses one after the other.

After calibration has been completed and the display

has been properly centred on the screen, confirm

with OK.

If the display is not centred, repeat the calibration

process by pressing the

Cancel

pressing the

Calibrate

button.

button and then

Table of Contents

Do you have a question about the METPOINT BDL compact and is the answer not in the manual?