Cruise Control - Maserati GRANCABRIO Owner's Manual

Cruise Control

General
The Cruise Control function allows the
driver to maintain the desired vehicle
speed constant without pressing the
accelerator pedal. This reduces driving
fatigue on highways, especially long
trips, as the set speed is automatically
maintained.
WARNING: The device can only be
activated at speeds exceeding
30 km/h (19 mph) and it turns off
automatically when the brake pedal
is depressed or when a speed of 200
km/h (125 mph) is exceeded.
Cruise Control must only be
activated when traffi c and
the route permit a constant
speed to be maintained safely for a
suffi ciently long distance.
Controls
Cruise Control is controlled by switch
A, by the rotating section B and by
button C (RCL).
Switch A has two positions:
- OFF: the device is deactivated;
- ON: the device is active. When
the device is activated, the green
warning light on the display
illuminates together with the
message "Cruise control on".
The rotating section B is used to
store the vehicle speed and to keep
it constant, or to increase or decrease
the speed stored.
B A
C
Turn the rotating section B to position
(+) to save the speed reached or to
increase the speed stored.
Turn the rotating section B to position
(–) to decrease the speed stored.
Every time rotating section B is reset,
the speed is increased or decrease
by approx. 1 km/h (0.6 mph). Keep
the rotating section turned to vary
the speed continuously. When a new
speed is reached, it will automatically
remain constant.
Button C (RCL) is used to resume the
speed stored.
WARNING: When the ignition key
is turned to STOP or switch A is in
the OFF position, the speed stored is
erased and the system deactivated.
5
161