General Procedure - horsch Shuttle 8.000 L Operating Instructions Manual

Do not leave the prepared spraying mixture,
¾
unused crop protection agent, uncleaned crop
protection agent canisters and the uncleaned
machine unattended to avoid dangers to other
persons.
Protect contaminated crop protection agent
¾
canisters and the contaminated machine
against precipitation.
Ensure sufficient cleanliness during and after
¾
spraying mixture preparation to keep the risks
as low as possible (e.g. thoroughly wash
off and dispose of used gloves. Dispose of
washing water and cleaning fluid in a proper
manner).
Besides the generally valid information listed
hereunder, you should also follow the product-
specific procedures described in the instructions
for use of the crop protection agents!
Pay attention to the prescribed water and
¾
preparation application quantities as per ins-
tructions for use of the crop protection agent.
Follow the instructions for use of the prepara-
¾
tion and the specified precautions!
Carefully determine the required filling or
¾
refill quantities to avoid residual quantities,
because environmentally friendly disposal of
residual quantities is very difficult.
Thoroughly rinse emptied preparation con-
¾
tainers (e.g. with canister flushing agent)
and mix in the flushing water to the spraying
mixture!
32
NOTE

General procedure

1. Determine the required water and preparation
application quantity as per instructions for use
of the crop protection agent.
2. Calculate the filling and refill quantity for the
spraying and spreading machine to be filled.
3. Fill the spraying mixture container half with
water.
4. Add the calculated preparation quantity.
5. Top up with water shortfall.
6. Pump over the spraying mixture before filling
following the instructions of the crop protec-
tion agent manufacturers.