Lighting - horsch Shuttle 8.000 L Operating Instructions Manual

Lighting

The Shuttle is equipped with lighting.
Connection to the carrier vehicle is made with 15-
pin plug-and-socket connectors 24 V ISO 12098.
Plugs and cable assignment
Contact Function
no.
1 Direction indicator left
2 Direction indicator right
3 Rear fog light
4 Earth (switches parking light/TankControl relay)
5 Left tail lights, clearance lamps, side lights and number plate
lighting (switches parking light/TankControl relay)
6 Right tail lights, clearance lamps, side lights and number
plate lighting
7 Brake light
8 Reversing light
9 Electricity supply (constant plus)
(voltage supply parking light/TankControl relay)
10 Sensor for brake lining wear indicator
11 Indicator for spring accumulator brake
12 Axle lifter
13 Earth for data line (power supply parking light/
TankControl relay)
14 CAN-H
15 CAN-L
WARNING
Traffic accidents caused by defective lighting.
Check the lighting before setting off.
¾
Check warning notices and lamps for cleanli-
¾
ness.
Conductor Cable colour
cross-section
1.5 mm yellow
2
1.5 mm green
2
1.5 mm blue
2
2.5 mm white
2
1.5 mm black
2
1.5 mm brown
2
1.5 mm red
2
1.5 mm pink
2
2.5 mm orange
2
1.5 mm grey
2
1.5 mm white/black
2
1.5 mm white/blue
2
2.5 mm white/red
2
1.5 mm white/green
2
1.5 mm white/brown
2
21