Filter; Working Lights - horsch Shuttle 8.000 L Operating Instructions Manual

Filter

CAUTION
Spraying mixture running out! Wear personal
protective outfit!
Clean the filter after suctioning contaminated
¾
water.
The filter should be cleaned daily to prevent
¾
dirt deposits in it.
The filter is located below the external control
unit.
Filter
1. Drain the filter housing. Open the valve for
this purpose.
2. Unscrew the lid of the filter housing.
3. Remove the filter and clean/change it. Collect
the deposits in a suitable tank and dispose
of properly.
4. Insert the cleaned/new filter again and close
the filter housing with the lid. Close the lock
valve again.
Clean the thread of the filter housing if soiled.
46
NOTE
NOTE

Working lights

An LED spotlight is attached to the spraying mix-
ture container to light the external control unit.
Working lights
It is operated with the rocker switch on the ex-
ternal control unit.
Operation of working lights
WARNING
Risk of accident by blinding other road users!
The working lights must always be switched off
during road travel!