Table of Contents
Advertisement
Lubricating the machine
The machine should be lubricated at regular
intervals and after each cleaning action.
This ensures operability and reduces repair
costs and downtimes.
CAUTION
Hygiene
Lubricants and mineral oil products are not
harmful to health as long as they are used as
instructed.
Prolonged skin contact or the inhalation of
vapours should, however, be avoided.
Handling lubricants
Wear gloves or use protective creams to protect
against direct contact with oils.
Thoroughly clean any oil off your skin by
washing with warm water and soap.
Lubricate / grease the machine at the indicated
intervals. Carefully clean lubrication points and
grease gun before lubricating, so that no dirt
is pressed into the bearings. Press the used
up grease completely out of the bearings and
replace it with fresh grease!
Lubricants
A lithium-saponified multi-purpose grease
¾
with EP additives must be used for lubrication
tasks.
Use only cleaned hydraulic oil that complies
¾
with the demanded cleanliness class:
Cleanliness class 9 as per NAS 1638
•
Cleanliness class 18/16/13 as per ISO 4406
•
NOTE
49
Advertisement
Table of Contents
