Table of Contents
Advertisement
WARNING
Danger to health through contact with spray-
ing mixture if the filling opening of the spraying
mixture container is not closed correctly.
Before each transport travel, check whether
¾
the filling opening of the spraying mixture
container is closed properly.
Immediately replace a damaged or worn lid
¾
seal on the filling opening if spraying mixture
escapes from the filling opening with the lid
closed.
External control terminal
WARNING
Danger of environmental damages from con-
tamination with chemicals.
Draw water only from reservoirs without con-
¾
nection to the water mains.
The national laws and relevant regulations for
¾
filling the spraying mixture container via the
suction hose from open water tapping points
must be complied with.
Observe the regulations of the competent
¾
water protection authorities.
The national and international regulations
¾
regarding the transport of agricultural equip-
ment must be observed when transporting
crop protection agents and spraying mixture!
CAUTION
Danger of machine damages from impurities
in the water.
Use only filtered water for filling. The com-
¾
ponents in the water circuit will be damaged
from contamination.
The Shuttle is essentially filled via valves and
the fitting on the rear of the attachment.
A
B
Pump and operating elements
E
D
Fitting on the illuviation valve
Fitting
A Main filling valve
B Fitting valve
C Lever for speed control of the delivery pump
¾ The delivery rate of the pump can be regulated
and set here.
D Activate/deactivate rinsing nozzles
E Activate/deactivate shock nozzle
F Activate/deactivate washing gun
G Activate/deactivate canister flushing
1 Fresh water filling hose connection (Camlock)
2 Fresh water tank (Tank 1- 200 litres)
3 Filling on/off
4 Fresh water tank (Tank 2- 800 litres)
5 Internal tank cleaning / illuviation valve
6 Fresh water pump operation
7 Delivery pump operation
C
G
F
6
7
4
2
3
5
1
35
Advertisement
Table of Contents
