System Turns Off - Pylontech PowerCube-X1 Operation Manual

Lithium-ion phosphate energy storage system
Hide thumbs Also See for PowerCube-X1:
Table of Contents

Advertisement

3.6.5 System turns off

When failure or before service, must turn the battery storage system off:
(1) Soft-off the PCS through PCS's control panel.
(2) Turn off the switch between PCS and battery string (PowerCube-X1/X2), or turn off the power
switch of PCS, to make sure no current transmission through battery string and PCS.
(3) Turn off the "Power Switch" of the BMS.
(4) Turn off the "Power Switch" between BMS and inverter.
(5) Turn off the "Power Switch" of the MBMS. If the ESS configures only single battery without MBMS,
then ignore this operation step.
(6) Turn off the UPS if configured.
The UPS can turn on if have equipment must keep running. Otherwise suggest turn off the UPS to
save power.
L'UPS peut s'allumer si l'équipement doit continuer à fonctionner et ne peut pas s'éteindre. Sinon,
vous devez éteindre l'UPS pour économiser son énergie.
Caution: Before change the battery module for service, must charge/discharge the replaced
battery to same voltage as the other modules in the system. Otherwise system needs long time
to do the balance for such replacment module.
Avant de remplacer le module de batterie pour le service, vous devez charger/décharger la
batterie remplacée à la même tension dans les modules de batterie du système. Sinon, le
système a besoin d'une longue durée pour équilibrer ce module de batterie remplacé.
Warning: Do not turn off the "Power Switch" during normal running condition. Otherwise will cause
this battery string current surge by another battery strings. If turned off the "Power Switch" in
normal running condition, must first turn off the PCS.
Ne pas éteindre l'interrupteur d'alimentation pendant le fonctionnement normal. Sinon, cette
chaî ne de batterie subira une surintensité par une autre chaî ne de batterie. Si l'interrupteur
d'alimentation s'éteint sous les conditions de fonctionnement normal, il faut d'abord éteindre le
PCS.
NOTE
After installation, DO NOT forget to register online for full warranty:
www.pylontech.com.cn/service/support
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powercube-x2

Table of Contents