System Turns On - Pylontech PowerCube-X1 Operation Manual

3.6.3.3 Multi MBMS Communication Mode
In some project it configures multi Energy Storage Systems. In
this case will have multi MBMS. The address of MBMS must follow
<MBMS's Address Configure Table>
3.6.4 System turn
Double e check all
PCS is same level
OFF.
Warnin ng: MBMS m
System m turns on st
(1) Sw witch the ex
wo ork normally
(2) Tur rn on the 1
Th he second B
Fro om 1st BMS
ns on
l the power r cables an
l with the b attery syste
must be turn ed on after
tep:
xternal pow er or inverte
y.
BMS (Batte ery Control M
st t
BMS must be e operated
to the last B BMS Then tu
nd commun nication cab
em. Check a all the pow
r all battery strings self-c
er/PCS on , to make s
Modules) of f battery stri
after the fir rst battery s
rn on the b attery string gs on one by
14 / 28
bles. Make sure the vo oltage of th
er switch of f every batt
check finish h.
sure all the power equ uipments ca
ing:
tring's self-c check is suc ccessful.
y one.
he
tery system is
an
19PIXV0703