System Turns On - Pylontech PowerCube-M1 Operation Manual

3.6.4 System turns on

Double check all the power cables and communication cables. Make sure the voltage of the
PCS is same level with the battery system. Check all the power switch of every battery system is
OFF.
Warning: MBMS must be turned on after all battery strings self-check finish.
(1) Check the UPS is turned on. And the UPS is power supplying.
(2) Switch the external power or PCS on, to sure all the power equipment can work normally.
(3) Turn on the 1 BMS (Battery Control Modules) of battery string:
st
The second BMS must be operated after the first battery string's self-check is successful.
From 1st BMS to the last BMS Then turn on the battery strings on one by one from 1st BMS to the
last BMS.
Turn on the "POWER OUTPUT SWITCH":

Turn on the "Power Switch":

Caution: When the breaker is tripped off because the system has over current or short circuit,
16 / 32
19PIMV0802