Christie CP4325-RGB Instruction Sheet page 10

7. Vertically, pull out the integrator assembly and place on a flat surface.
Christie recommends covering the LOS opening to keep dust and other contaminants out.
8. Remove the four screws securing the coupling elbow.
9. Install the new coupling elbow on the integrator assembly.
10. To re-install these components, follow these steps in reverse order.
Ensure the card cage and top cover locking pins are engaged when re-installing.
Replacing the CP4325-RGB Coupling Elbow Instruction Sheet
020-102890-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Replacing the CP4325-RGB coupling elbow
10