5. Disconnect the red, green, and blue mini-SAS harnesses from the card cage through the
projector service access door.
6. Disconnect the three harnesses (J5, J7, J87) from the SSCB.
7. Disconnect the two harnesses (J17, J18) from the backplane board.
8. Loosen the four captive screws securing the card cage.
Replacing the CP4325-RGB Coupling Elbow Instruction Sheet
020-102890-01 Rev. 1 (07-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Replacing the CP4325-RGB coupling elbow
7