SAV 876.17
9 APPENDIX
9.5
Transport
If the control unit is not supplied as an integral part of a machine, the following conditions apply for shipping:
For shipping, the device must be protected against dust, small particles and moisture. Shipping in a padded
package is usually sufficient for safe transport.
ATTENTION!
Figure 11: Packaging of the control unit
The components of the control unit do not contain any liquids or gases which can leak during transport and cause
damage.
Version 1.0
Risk of damage to the device!
Dropping from a great height can lead to mechanical damage on the
device and the electronics contained therein.
Dropping from a great height should be prevented.
■
NOTE!
The control unit has to be checked for transport damage immediately after
delivery. If transport damage has occurred, this has to be reported to the
shipping company and to SAV GmbH immediately (see Manufacturer's
information).
NOTE!
For environmentally friendly disposal of your packaging, please observe
the applicable environmental regulations.
[
125
]
EN