SAV 876.17
9 APPENDIX
9.4
Error messages
9.4.1
Self-test errors
Display
Error no.
E2100-
E2113
E2008-
E2011
E2029
E2004-
E2007 /
E2013-
E2017
E2000-
E2003 /
E2018-
E2023
E2024-
E2027
E2028
Error cause
Clear text
An error occurred when
"Control input"
checking the function of
the control inputs.
An error occurred when
"Interlock"
checking the function of
the interlock.
"Unknown"
Carry out restart
An error occurred when
"Current"
checking the function of
the current measurement.
An error occurred when
"Voltage"
checking the function of
the voltage measurement.
An error occurred when
checking the function of
"Pot. relay"
the potential enabling
relay.
An error occurred when
"Watchdog"
checking the function of
the watchdog.
Self-test errors
Measures for error
localisation
Check if the contacts on the
terminal strip for the control
inputs are OK. Check if the
external 24 V and GND con-
tact the terminal strip. If this
is the case, please contact
service.
Carry out restart
Contact service
Carry out restart
Contact service
Carry out restart
Contact service
Carry out restart
Contact service
Carry out restart
Contact service
Carry out restart
Contact service
[
]
116
Error elimination
Comment
Request replace-
ment device,
if necessary
Request replace-
ment device,
if necessary
Request replace-
ment device,
if necessary
Request replace-
ment device,
if necessary
Request replace-
ment device,
if necessary
Request replace-
ment device,
if necessary
Version 1.0