Mask, Fender; Removing The Front Fender; Installing The Front Fender; Removing The Headlight Mask With The Headlight - KTM 250 EXC EU Repair Manual

13

MASK, FENDER

13.1

Removing the front fender

13.2

Installing the front fender

13.3

Removing the headlight mask with the headlight

Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
602712-10
–
Remove screws
602713-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
602713-11
–
Mount and tighten screws
Guideline
Remaining screws, chassis
602712-11
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Switch off all power consumers.
–
Remove screw
–
Release rubber band
602762-10
.
1
. Remove the front fender.
2
.
2
p. 117)
and take off the clamp.
1
. Slide the headlight mask up and swing it forward.
2
p. 89)
.
1
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 90)
89