Rear Suspension Setting Chart (Trophy Models Only) - Triumph Trophy Handbook

Maintenance and Adjustment
Note:
• The setting is measured as the
number of adjuster
counter-clockwise from the fully
clockwise (hardest) position.
• The motorcycle is delivered from
the factory with the spring pre-load
set 20 clicks counter-clockwise from
the fully clockwise position.
Rebound Damping Adjustment
1
chsi
1. Rebound damping adjuster
The rebound damping adjuster is located at
the bottom of the rear suspension unit and is
accessible from the left hand side of the
motorcycle.
To adjust the rebound damping setting,
rotate the slotted adjuster clockwise to
increase, and counter-clockwise to decrease.
Note:
• The setting is measured as the
number of adjuster
counter-clockwise from the fully
clockwise (hardest) position.
• The motorcycle is delivered from
the factory with the spring pre-load
set 14 clicks counter-clockwise from
the fully clockwise position.
142
Rear Suspension Setting Chart
(Trophy models only)
'clicks'
Loading Mode
Solo Comfort
Riding
Standard
Sport
Solo and Comfort
Luggage
Standard
Sport
Rider, Comfort
Passenger
Standard
and
Sport
Luggage
² Number of clicks counter-clockwise from
the fully clockwise position noting that the
first stop (click) is counted as 1.
The standard suspension settings provide a
comfortable ride
characteristics for general, solo riding. The
charts above show suggested settings for the
rear suspension.
An increase in spring pre-load requires firmer
damping, a reduction in spring pre-load
requires softer damping.
The damping must be adjusted to the road
conditions and the spring pre-load.
'clicks'
Spring Rebound
Pre-Load² damping²
20 18
20 14
20 10
10 18
10 12
10 9
0 16
0 10
0 7
and good handling