Applications; Warning Notices On The Cleaning Device - Fronius Robacta Reamer V Easy Operating Instructions Manual

The Robacta Reamer V Easy Han6P J also has an adjustment that works as follows:
-
-
-
-
-
Components required for installing the Robacta Reamer V Easy Han6P J:
-
-
Components required for installing the Robacta Reamer V Easy Han6P J together
with the adjusted wire cutter:
-
-
-
-
The options available for the cleaning device are shown on the following pages.

Applications

The cleaning devices are exclusively intended for use in robot and other automated
applications, and can be used for a wide range of materials.
The main application areas are:
-
-
-
-
-
Warning notices The cleaning device is fitted with warning notices and a rating plate. The warning notices
on the cleaning and rating plate must not be removed or painted over.
device
The locations of the warning notices are shown on the Robacta Reamer V as an
example. The warning notices are all in the same place on the Robacta Reamer V Easy,
Robacta Reamer V Easy Han6P and Robacta Reamer V Easy Han6P J.
16
The manufacturer always screws all Robacta Reamer V Easy Han6P J to an adjust-
ment plate in the same position
The Robacta Reamer V Easy Han6P J is fitted to a mounting plate at the installation
location
Dowel pins interlock the Robacta Reamer V Easy Han6P J adjustment plate and the
mounting plate so that the Robacta Reamer V Easy Han6P J is always firmly
fastened to the mounting plate in the same position
As a result, when a device is replaced, the robot does not have much setting up to
do. Once the device is replaced, only the motor in the lifting device of the new clean-
ing device has to be adjusted
NOTE!
The gas nozzle clamping device is adjusted for gas nozzles with an outer dia-
meter of 25 mm (0.
98 inch). If gas nozzles with a different outer diameter are used, the gas nozzle
clamping device must be adjusted before using it for the first time and each time a
device is replaced, as appropriate to the gas nozzle.
The same system in connection with the cleaning device is also available for the
wire cutter
Robacta Reamer V Easy Han6P J
Mounting plate for the Robacta Reamer V Easy Han6P J
Robacta Reamer V Easy Han6P J
Mounting plate for the Robacta Reamer V Easy Han6P J
Adjusted wire cutter
Mounting plates for the wire cutter
Automobile and component supply industry
Equipment construction
Chemical plant construction
Machine and tracked vehicle manufacturing
Construction machinery and special vehicles