Fitting The Cleaning Cutter; General - Fronius Robacta Reamer V Easy Operating Instructions Manual

Fitting the cleaning cutter

General

NOTE!
The cleaning cutter is fitted in the same way for all Robacta Reamer V cleaning
devices.
Fitting the clean-
ing cutter
Danger due to cleaning cutter that has become very hot through use.
This can result in severe burns.
▶
Danger from incompatible wearing parts.
This can result in damage to property and malfunctions.
▶
The cleaning cutter is not part of the scope of suppl.. Consult the manufacturer's spare
parts list for the appropriate cleaning cutter:
1
2
3
48
CAUTION!
Before handling cleaning cutters, allow cleaning cutter to cool to room temperature
(+25 °C, +77 °F).
CAUTION!
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
No liability is accepted for damage caused by the use of contact tips, gas nozzles or
cleaning cutters from third-party manufacturers.
Remove the protective covering from the cleaning device
Fit the protective covering to the cleaning device in its original position
https://spareparts.fronius.com/