Cleaning Program On The Robacta Reamer V Easy And Robacta Reamer V Easy Han6P J; Cleaning Program On The Robacta Reamer - Fronius Robacta Reamer V Easy Operating Instructions Manual

Cleaning pro-
gram on the
Robacta Reamer
V Easy and
Robacta Reamer
V Easy Han6P J
- c. 25 mm (0.98 in.) next to wire cutter
Start
Start from position C
- Speed: high speed
Start from position D
- Enter wire cutter
- Speed: 10 cm/s
(236.22 ipm)
Set
- External signal "Cut wire electrode"
Wait 0.5 sec.
Start from position E
- c. 50 mm (1.97 in.) centrally above
the wire cutter
- Speed: 10 cm/s
(236.22 ipm)
Reset
- External signal "Cut wire electrode"
Wire cutter option
73