Before Commissioning; Proper Use; Operators, Maintenance Personnel; Setup Regulations - Fronius Robacta Reamer V Easy Operating Instructions Manual

Before commissioning

Proper use

The cleaning device is to be used exclusively for cleaning Fronius robot welding torches,
especially the gas nozzle and its interior, in automatic mode and within the scope of the
technical data. Any use above and beyond this purpose is deemed improper. The manu-
facturer shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
-
Operators, main-
tenance person-
nel
Risk of machines starting automatically.
This can result in serious injury and damage to property.
▶
▶

Setup regulations

The cleaning device is tested to protection class IP 20, meaning:
-
-
The device must not be set up and operated outdoors. The built in electrical parts must
be protected from direct wetting.
Danger from machines falling or toppling over.
This can result in serious injury and damage to property.
▶
Compressed air To ensure that the cleaning device functions correctly, the following compressed air sup-
supply specifica- ply specifications must be met:
tions -
-
carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
performing all stipulated inspection and maintenance work
WARNING!
The device must only be used by 1 person at a time. It is also necessary to ensure
that no one else is within the working area of the device when the device is being
used.
The device must only be serviced by 1 person at a time. It is also necessary to
ensure that no one else is within the working area of the device when the device is
being serviced.
Protection against penetration by solid foreign bodies with diameters > 12.5 mm
(0.49 in.)
No protection against the ingress of water
WARNING!
Always secure the cleaning device to the underlying surface.
Establish compressed air supply using a pressure limiter and compressed air filter
Provide compressed air quality conforming to ISO 8573-1:2001, class 7 4 3, instru-
ment air
•
Solid particle concentration £ 10 mg/m
Vapour pressure dew point £ + 3°C
•
•
Oil concentration £ 1 mg/m
3
3
39