Robacta Reamer V Easy Han6P J Scope Of Supply, Options And Required Components; Robacta Reamer V Easy Han6P J Scope Of Supply; Robacta Reamer V Easy Han6P J Required Components; Robacta Reamer V Easy Han6P J Options - Fronius Robacta Reamer V Easy Operating Instructions Manual

Robacta Reamer V Easy Han6P J scope of supply,

options and required components
Robacta Reamer
V Easy Han6P J
scope of supply
not shown:
(6)
(7)
(8)
Robacta Reamer
V Easy Han6P J
required compon-
ents
Robacta Reamer The following options are available for the cleaning device:
V Easy Han6P J -
options -
-
-
Harting Han6P connecting plug (X1) without cable
Operating instructions
Fixings for assembling the cleaning device:
- 4 screws
Installation stand
Suction line for canister (10 litres)
Adjusted wire cutter
Mounting plates for the wire cutter including fixings
NOTE!
The "Robacta Reamer" parting agent
(1)
(item number 42,0411,8042) and the
cleaning cutter are not part of the
scope of supply.
(1) Robacta Reamer V Easy Han6P J
cleaning device
(2) Spatter tray retainer
(2)
(3) Spatter tray
(4) Tightening key for cleaning motor
(3)
(5) Compressed air relief valve
(4)
(5)
NOTE!
The mounting plate and fixings are not
part of the scope of supply for the
cleaning device, but are needed to
ensure that the cleaning device is
adjusted when it is installed.
21