Installing The Electrically-Controlled Wire Cutter - Fronius Robacta Reamer V Easy Operating Instructions Manual

5
Installing the
1
electrically-con-
trolled wire cutter
2
NOTE!
Route the compressed air hose for the
wire cutter behind the cleaning device
* Use a suitable adapter to connect
the wire cutter compressed air
hose to the cleaning device.
1
NOTE!
Use the fixings supplied with the wire
cutter
Ensure that the recesses in the spacers
face the cleaning device.
NOTE!
The wire cutter must be controlled elec-
trically by the robot control
51