Safety - Fronius Robacta Reamer V Easy Operating Instructions Manual

Safety

Safety Observe the following safety rules for all work described in the "Installation and start-up"
section.
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Risk of machines starting automatically.
This can result in serious injury and damage to property.
▶
Danger from mechanically powered parts, flying parts (shavings, etc.), com-
pressed air/parting agent mixture escaping from the parting-agent injection nozzle.
This can result in serious injury and damage to property.
▶
▶
Whenever the cleaning device is supplied with voltage and/or compressed air, a
risk of serious injury exists from: rotating cleaning cutter, cleaning motor moving
up/down, extending/retracting gas nozzle clamping device, activated wire cutter,
flying parts (shavings, etc.), compressed air/parting agent mixture escaping from
the parting-agent injection nozzle.
This can result in serious injury and damage to property.
If work has to be performed on the cleaning device while it is being supplied with voltage
and/or compressed air, take the following protective measures:
▶
▶
▶
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
In addition to these Operating Instructions, also observe the safety rules issued by
the manufacturer of the robot and welding system. For your personal safety, ensure
that all protective measures have been taken and will remain in place while you are
in the working area of the robot.
WARNING!
Before carrying out any work, disconnect the customer's compressed air and power
supplies from the cleaning device and the connected system components, and
ensure that they remain disconnected until work is complete.
Before carrying out any work, make sure that the cleaning device is depressurised -
for the necessary steps, see the following section
device is depressurised
WARNING!
Keep your body, especially your hands, face, hair, any objects and all clothing away
from the cleaning cutter, cleaning motor, lifting device, gas nozzle clamping device,
wire cutter and parting-agent injection nozzle.
Wear ear protection!
Wear protective goggles with side protection.
Ensuring that the cleaning
from page 38.
37