Screwing The Cleaning Device To The Underlying Surface - Fronius Robacta Reamer V Easy Operating Instructions Manual

4
Attach the spatter tray retainer as shown
Screwing the
cleaning device
to the underlying
Danger from machines falling or toppling over.
surface
This can result in serious injury and damage to property.
▶
▶
▶
1
2
Place components on the underlying surface and secure
42
WARNING!
Always secure the cleaning device to the underlying surface.
If the underlying surface thickness is less than 5 mm (0.197 in.), use the fixings sup-
plied with the cleaning device for fastening.
If the underlying surface thickness is greater than 5 mm (0.197 in.), do not use the
fixings supplied for fastening. In this situation the installer is responsible for selecting
the right type of fixing.
Place the cleaning device and the spatter tray retainer on a level, firm and vibration-
free surface (foundation).
- Position the cleaning device in such a way that the distance the robot has to
travel to the cleaning position is as short as possible.