Robacta Reamer V control elements, connections
and mechanical components
Robacta Reamer
V control ele-
ments, connec-
tions and mech-
anical compon-
ents
Side view
(1)
Risk of damage to standard I/O connection (X1) supply due to overcurrent.
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
30
Standard I/O connection socket (X1)
for a + 24 V DC supply
CAUTION!
Compressed air connection
for a dry compressed air supply at 6 bar (86.99 psi)
Thread identification compressed air connection: G ¼"
Fill-level control sensor
emits a signal once the fill level in the parting agent container falls below a spe-
cified level
Parting agent container
Parting agent adjuster
for adjusting the amount of parting agent sprayed inside the gas nozzle
Protective covering
Lifting device
lifts the cleaning motor and the cleaning cutter when cleaning the inside of the
gas nozzle
Cleaning motor with parting-agent injection nozzle
drives the cleaning cutter
Compressed air and electrical connections for wire cutter option
Cleaning cutter
with internal through hole for the parting-agent injection nozzle
Front view
(12)
(11)
(10)
(9)
(8)
(7)
(6)