Move Unit - Kubota RT120Q Operator's Manual

RT120Q Operator's Manual
Operate
5. Use boom/swing control and bucket/
dipper control to dig hole or trench. For
more information about backhoe controls,
see "Backhoe Console" on page 63.
• Keep dipper and boom at right angles
as much as possible for maximum
power.
• Keep bucket in line with dipper as
much as possible.
• Position bucket so teeth cut soil. As
soil is cut, curl bucket under dipper.
• Move dipper and bucket together.
Increasing engine speed will not
increase backhoe force.

Move Unit

NOTICE:
• Backhoe may obstruct the forward
visibility of the operator. Machines with
limited forward visibility should be
driven only for short distances and with
the help of a spotter.
• Only use this method to move unit less
than 30' (10 m) at one time.
1. Clear the area around the machine of all bystanders.
2. Raise stabilizers enough to clear ground.
3. Ensure ground drive direction control is in neutral.
4. Move attachment speed/direction control to neutral position.
5. Move ground drive control to neutral position.
6. Use remote ground drive switch to move unit.
7. Lower stabilizers.
Backhoe - 123