Intended Use; Equipment Modification - Kubota RT120Q Operator's Manual

RT120Q Operator's Manual

Intended Use

Intended Use
The RT120Q is a riding trencher designed to install buried service lines of various sizes using a variety of
®
Ditch Witch attachments.
Attachment
H910 trencher
H911 trencher
H1032 plow
H1052 combo
H1140 saw
RC120 reel carrier
A920 backhoe
This unit is designed for operation in temperatures typically experienced in earth moving and construction
work environments. Contact your Ditch Witch dealer for provisions required for operating in extreme
temperatures. Use in any other way is considered contrary to the intended use.
The RT120Q should be used with genuine Ditch Witch chain, teeth, and sprockets. It should be operated,
serviced, and repaired only by persons familiar with their particular characteristics and acquainted with the
relevant safety procedures.

Equipment Modification

This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.
NOTICE: The protection offered by the Rollover Protective System (ROPS) will be impaired if it has
been subjected to any modification, structural damage, or has been involved in an overturn accident.
The ROPS must be replaced after a roll-over.
Max. width/diameter
24" (610 mm)
24" (610 mm)
3" (80 mm)
n/a
103" (2.62 m)
84" (2.13 m) reel dia
24" (610 mm)
Max. depth
96" (2.4 m)
92" (2.3 m)
42" (1.07 m)
70" (1.78 m)
40.5" (1.03 m)
n/a
105" (2.7 m)
Overview - 3