Service Precautions; Welding Precaution; Washing Precaution; Changing Attachments - Kubota RT120Q Operator's Manual

Service - 154

Service Precautions

To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off.
• Refer to engine manufacturer's manual for engine maintenance instructions.
• Lower unstowed attachments to ground before servicing equipment.

Welding Precaution

NOTICE: Welding can damage electronics.
• Disconnect battery at battery disconnect switch, if equipped, or disconnect battery cables before
welding to prevent damage to battery.
• Do not turn off battery disconnect switch with engine running or alternator and other electronic
devices may be damaged.
• Welding currents can damage electronic components. Always disconnect the ECU ground
connection from the frame, harness connections to the ECU, and other electronic components prior
to welding on machine or attachments. Connect welder ground close to welding point and ensure no
electric components are in the ground path.

Washing Precaution

NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components
with water.

Changing Attachments

The RT120Q is programmed to operate with the original attachment configuration. If you change
attachments, contact your Ditch Witch
change attachments without updating the electronic programming, your attachment may not function
.
correctly
Read operator's manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
®
dealer to ensure the electronic programming is updated. If you
RT120Q Operator's Manual
Service Precautions
273-475