Kubota RT120Q Operator's Manual page 104

RT120Q Operator's Manual
Set Up
1. If using optional trench cleaner, remove bolt
installed for transport (shown).
2. Fasten and adjust seat belt.
3. Start tractor. See page 84 for start-up
procedures.
4. Drive to starting point. Move in line with
planned trench. See page 85 for driving
procedures.
IMPORTANT:
• When cutting asphalt, start trench in
soil at edge of road and use
shortest possible boom at full
depth.
• Sight along center of hood to a
stake driven beyond end of trench
line for straight trench.
• For optimal spoils delivery, adjust
the auger positions forward or
backward to accommodate terrain
and digging depth.
5. Set parking brake and verify parking brake indicator is on.
6. Move ground drive switch to low.
7. Turn seat to the desired position.
8. Engage axle lock.
9. Lower boom to just above ground.
10. Check that attachment speed/direction control is in neutral.
11. Check that boom is in line with planned trench.
12. Lower backfill blade, if equipped, to reduce shock when trenching begins.
t33om080w.eps
Trench - 103