Finish Job; Disassemble Drill String; Remove Drilling Attachment - Kubota RT120Q Operator's Manual

Drill - 138

Finish Job

Disassemble Drill String

1. Shut down tractor.
2. Disconnect drill string from drilling
attachment.
3. Remove drill bit.
4. Disconnect sections:
• Press tab through hole in female side
of joint (1) using special tool
(p/n 351-272).
• Pull rod sections apart (2).

Remove Drilling Attachment

1. Disconnect hydraulic hoses if necessary.
2. If desired, remove drilling attachment from
backfill blade.
RT120Q Operator's Manual
Finish Job