Table of Contents
Advertisement
Drill - 136
Remove Rod
If the length of rod outside the bore reaches 30' (9 m), ask a helper to remove rod sections as needed.
To help avoid injury:
•
Only access drill string with hands when tractor is shut down.
•
Always remove second rod (as shown). Leave first rod section attached to drilling attachment.
t48om060w.eps
Remove Rod Section
1. Stop rotation of drilling attachment.
2. Shut down tractor. See page 87 for proper shutdown procedures.
3. Disconnect and remove appropriate rod section with special tool (p/n 351-272). See "Disassemble Drill
String" on page 138.
Rotating shaft will cause death or serious injury. Stay
away.
RT120Q Operator's Manual
Operate
Advertisement
Chapters
Table of Contents
