Kubota RT120Q Operator's Manual page 67

Controls - 66
Item
9. Remote engine stop
switch
10. Bucket/Dipper control
11. Stow lock control
12. Right stabilizer control
Description
Press to stop engine
immediately.
To open bucket, move right.
To close bucket, move left.
To move dipper in, pull.
To move dipper out, push.
To lock:
• Raise boom fully.
• Pull stow lock handle.
• Lower boom slightly to
engage lock.
• Insert swing lock pin.
To unlock:
• Remove swing lock pin.
• Raise boom slightly.
• Push stow lock handle to
release lock.
To lower, push out.
To raise, pull in.
RT120Q Operator's Manual
Backhoe Console
Notes
For normal engine shutdown, use
ignition switch.
Note: This switch must be returned to
the UP position to allow engine
restarting.
Control can perform more than one
action at a time. By "feathering" the
control, operator can combine
backhoe operations.
Use this control to lock boom in the up
position.
NOTICE: Always use stow lock and
install swing lock pin during transport.
When unlocked, store swing lock pin
in holder located on left stabilizer
support.